Jaypee University of Engineering and Technology, Guna
  Faculty Members  
Mechanical Engg.

Dr. Kedari Lal Dhaker
Dr. Kedari Lal Dhaker
Assistant Professor(G-II)
: BE, ME., Ph.D.  
E-mail : kedarilal.dhaker[AT]juet.ac.in  
Contact No. : Ext. - 246  
Areas of Interest: Statistical analysis in engineering, Industrial engineering and operations research, Quality and reliability Engineering, Modeling and optimization of manufacturing processes
Brief Profile:
Dr. Kedari Lal Dhaker pursued his Bachelor of engineering (B. E.) in mechanical from M.I.T.S.-Gwalior (Government Aided Autonomous Institute of Govt. of Madhya Pradesh)-in the year of 2006. In the year of 2008, he has completed post graduation in production engineering from Delhi Technological University (DTU), New Delhi and has completed his PhD in advanced manufacturing technology from Jaypee University of Engineering and Technology (JUET), Guna in year 2020.

After completion of Post Graduation, Dr.Dhaker has joined the India’s leading engineering consulting company, TATA CONSULTING ENGINEER’S LTD (TCE) as Trainee Engineer-Mechanical. At TCE, he was involved in engineering, management, erection and commissioning of mechanical equipments of mega steel plant expansion project (10 MTPA) at TATA STEEL, Jamshedpur.

The team, in which he was a key member has successfully engineered, managed and commissioned the industrial projects: De-dusting system, Primary coke gas cooling plant, Tar precipitation system, Gas cleaning plant, Gas exhauster system at world’s leading steel manufacturing plant (Tata Steel, Jamshedpur and Kalinganagar).

Dr. Dhaker has served at TATA group for 5 years as Senior Engineer-Mechanical and made career transition from industry to academia. He Joined the JUET as an Assistant Professor (G-ii)-Mechanical in year 2013.



Publication details google profile link

International Journal Papers

1. Kedari Lal Dhaker and Arun Kumar Pandey, “Particle Swarm Optimisation of Hole Quality Characteristics in Laser Trepan Drilling of Inconel-718”, Defence Science Journal, 69(1) (2019) 37-45. DOI : 10.14429/dsj.69.12879.

2. K.L. Dhaker and A.K. Pandey, “Multi-objective Optimization in Laser Trepan Drilling of Inconel-718 Sheet by Using a Genetic Algorithm (GA)”, Lasers in engineering, 42(4-6) (2019) 337-361.

3. Kedari Lal Dhaker, Bhagat Singh and Yogesh Shrivastava., “Adaptive neuro-fuzzy inference system based modeling of recast layer thickness during laser trepanning of Inconel-718 sheet”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(423) (2019), DOI:10.1007/s40430-019-1933-2.

4. Kedari Lal Dhaker and Bhagat Singh and Yogesh Shrivastava, “Experimental investigation and parametric optimisation of the hole-circularity and recast layer during the laser trepan drilling”, Australian journal of mechanical engineering, Taylor & Francis (2020),DOI: https://doi.org/10.1080/14484846.2020.1794522.

5. Kedari Lal Dhaker , Arun Kumar Pandey and B. N. Upadhayay, “Experimental Investigation of Hole Diameter in Laser Trepan Drilling of Inconel718 Sheet”, Materials Today: Proceedings, 4 (2017)7599–7608.

6. Kedari Lal Dhaker and Arun Kumar Pandey, “Experimental study of Hole Taper in Laser Trepan Drilling of Nickel Based Super alloy Sheet” Materials Today: Proceedings, 5 (2018) 23994–24004.

Conference Paper:

1. Kedari Lal Dhaker, Arun Kumar Pandey, Optimization of hole circularity in Laser Trepan Drilling of Inconel-718 sheet by Genetic Algorithm. Proceeding of 3rd International Conference on Advancements and Recent Innovations in Mechanical, Production and Industrial Engineering ARIMPIE-2017.

2. Kedari Lal Dhaker, Arun Kumar Pandey , Modelling and Simulation of Thermal Stress Distribution in Laser Cutting of Ti-alloy Sheet, proceedings of National Conference on Product design and Manufacturing (NCPDM 2015).

Work shop and Training programs attended:

1. 2019, Faculty development programme on “Deep Learning and Applications” during 9-13, December 2019, organised by Ministry of electronics and information Technology, Government of India.

2. 2019, “Faculty development program for students Induction (FDP-SI)-Human Values”, organised by AICTE during 16- 18, September 2019 at JUET-Guna (MP).

3. 2017, “National work shop on Application of MATLAB in Science & Engineering”, February 11- 12, 2017” organized by Department of ECE, JUET-Guna (MP).

4. 2016, Completed training on “Solid Works CAD Expert” during Dec 16-18 2016 and April 1-2, 2017, conducted by TRANNSCAD –Indore (MP)

5. 2015, Participated in “National conference on product design and manufacturing (NCPDM 2015)”, at MNNIT Allahabad,21-22 November 2015.


1. “The Data Scientist’s toolbox” Johns Hopkins University, Coursera, Aug. 2020
2. “Data Science Math Skills”, Duke University, Coursera, Aug. 2020
3. “Basic Statistics” University of Amsterdam, Coursera, Sept. 2020








Important Disclosures
Important Links
Training / Consultancy Programs
Other Links

University Anti Ragging Cell
Mandatory Disclosures
Information Under RTI Act
Grievance Submission
Prevention on Sexual Harassment of Women at Workplace

Conferences & Workshop Archives
MOU with Universities / Institutions
LRC Intranet Services
Student Activities
JUET Chronicle
JUET Research Journal
The Observer : e-Newspaper
National Academic Depository (NAD) : Obtain Digitally Verified Degree

Cement Production & Quality Control
Consultancy & Material Testing Facility
Thermal Power Plant Simulation
Wind Engineering Application Centre
National Apprentice Training Scheme (NATS)

JIIT Noida
JUIT Waknaghat
JU Anoopshahr
Unnat Bharat Abhiyan
MHRD initiatives under NMEICT
Vidya Lakshmi (Education Loan Portal)
SWAYAM - An Initiative of MHRD
MP Pvt. University Regulatory Commission
Consortium for Educational Institutions

Jaypee University of Engineering and Technology, A-B Road, Raghogarh, Distt. - Guna (M.P.), PIN - 473226, INDIA