Areas of Interest: Manufacturing Processes, Functional materials, Parametric Optimization
Education: B.E., M. Tech., Ph.D.
E-mail: amit.sharma@juet.ac.in
Contact No. : 8959052409
Dr. Amit Sharma completed his graduation in Mechanical Engineering in 2003 from Dr. B. R. Ambedkar University, Agra. He obtained his Master of Technology in 2007 from Aligarh Muslim University, Aligarh in Mechanical Engineering with specialization of Industrial & Production Engineering. He was awarded Ph.D. degree from Motilal Nehru National Institute of Technology (MNNIT) Allahabad in October 2012. He has published many research papers in Science Cited Index (SCI) Journals, prestigious refereed International Journals, and leading conferences of India. Dr Sharma started his career as Lecturer in RKGIT Ghaziabad, Uttar Pradesh (May 2006-April 2008). He served in GLA University Mathura (UP) in the capacity of Assistant Professor (Feb 2012- June 2013). He joined Jaypee University of Engineering & Technology, Guna in July 2013. He has about 16 years of teaching experience in various educational institutes and more than 2 and half years of resaerch experience in DST funded Project (May 2008-Dec 2010). He has delivered invited and expert lectures in various Faculty Development programmes (FDPs) and workshops.
Moreover, he has served as a member secretary of Board of Studies (BOS) for 10 years and as Hostel Warden for 5 years. Presently, he is undertaking multiple administrative responsiblities, including serving as Coordinator of the Unnat Bharat Abhiyan (UBA) Executive Committee, Faculty Advisor for National Service Scheme (NSS), and Nodal Officer for the My Bharat Portal.
(SCI/Scopus Indexed):
1. Tasnim Arif and Amit Sharma, Predictive Analytics for Productivity and Hole Geometry in Electrical Discharge Drilling of Ti-alloy Using ANFIS, Defence Science Journal (Accepted- April 2026)
2. Tasnim Arif and Amit Sharma, Data-Driven Prediction of Overcut in Electrical Discharge Drilling of Ti-6Al-4V using Machine Learning for Process Improvement, Sadhana (Accepted- December, 2025).
3. Tasnim Arif and Amit Sharma, Parametric investigation in electrical discharge drilling of Ti-alloy using ANFIS, Concurrent Engineering: Research and Applications, 0(0) 1–12, 2025 (https://doi.org/10.1177/1063293X251396173).
4. Amit Sharma, Priyanka Joshi, Basanta Kumar Bhuyan and Rakesh Kumar Phanden, Investigation of excellence in Nd-YAG laser cutting of Al6061-T6 thin sheet using GRA coupled with PCA, Engineering Research Express, 6 (04) (2024) 5560, DOI: 10.1088/2631-8695/ad915c.
5. Tasnim Arif and Amit Sharma, Experimental Investigation in Sustainable Electric discharge drilling of Inconel alloy using grey-based fuzzy logic approach, Proceedings of the Institution of Mechanical Engineers Part E: Journal of Process Mechanical Engineering, 2024, DOI:10.1177/09544089231221541.
6. Gopal Ji, Bindu Mangla, Saviour Umoren, Amit Sharma, Generation of layers of pointed gourd seed extract on mild steel using drop casting and testing of their corrosion behavior in salty water, Moroccan Journal of Chemistry, 12(4) 1839-1851.
7. Siddhant Pratap Singh, Amit Sharma, Vivekanand Singh, and Sanjay Mishra, Effects of fiber type, content, orientation, and surface treatments on the mechanical properties of PAFRP composite, Engineering Research Express, 6 (01) (2024) 5011, https://doi.org/10.1088/2631-8695/ad1432.
8. Amit Sharma and Priyanka Joshi, Comparative Analysis of Laser Profile Cutting of Ni-based Superalloy Sheet Using RSM and ANN, International Journal on Interactive Design, and Manufacturing, 18 (5) (2024) 3413-3425.
9. Amit Sharma, Priyanka Joshi, and Kuldeep Kumar Saxena, Empirical modeling and optimization of kerf characteristics in Nd-YAG laser cutting of Al 6061-T6 sheet, Proceedings of the Institution of Mechanical Engineers Part E: Journal of Process Mechanical Engineering, 238 (2) (2024) 607-618.
10. Vijay Dwivedi, Pragun Mandla, Devyansh Gupta, Rishabh Chandel and Amit Sharma, Simulation of Tensile behaviour of Carbon Fiber Reinforced Polymer Matrix Composite, Material Today: Proceedings, doi.org/10.1016/j.matpr.2023.01.422 (February, 2023).
11. Priyanka Joshi and Amit Sharma, Investigation of parametric influences during cutting of contours in Al 6061-T6 sheet metal using pulsed Nd-YAG laser, Lasers in Engineering, 45(1-3) (2020) 35-68.
12. Priyanka Joshi and Amit Sharma, Optimization of process parameters during laser beam cutting of Ni-based superalloy thin sheet along curved profile using grey-fuzzy methodology, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40 (2018) 389-403.
13. Priyanka Joshi and Amit Sharma, Simultaneous optimization of kerf taper and heat affected zone in Nd-YAG laser cutting of Al6061-T6 sheet using hybrid approach of grey relational analysis and fuzzy logic, Precision Engineering, 54 (2018) 302-313.
14. Priyanka Joshi and Amit Sharma, Optimization of Dimensional Accuracy in Nd-YAG Laser Cutting of Aluminum alloy Thin Sheet using Hybrid Approach, Lasers in Engineering, 41 (4-6) (2018) 263-281.
15. Amit Sharma and Vinod Yadava, Experimental Analysis of Nd-YAG Laser Cutting of Sheet Materials-A review, Optics and Laser Technology, 98 (2018), 264-280.
16. Yogesh Shrivastava, Bhagat Singh and Amit Sharma, Analysis of Tool Chatter in Terms of Chatter Index and Severity Using a New Adaptive Signal Processing Technique, Experimental Techniques,42 (2) 2018, 141-153.
17. Yogesh Shrivastava, Bhagat Singh and Amit Sharma, Identification of Chatter in Turning Operation using WD and EMD, Materials Today: Proceedings 5, 23917–23926, 2018.
18. Priyanka Joshi, Amit Sharma and Yashwant Kumar Modi, Optimization of process parameters during laser cutting of Ni-based super alloy thin sheet using Response surface methodology, Materials Today: Proceedings 5, 24231–24239, 2018.
19. Amit Sharma and Vinod Yadava, Modelling and Optimization of Cut Quality Characteristics for Pulsed Nd: YAG Laser Curved Profile Cutting of Ni-Based Superalloy Thin Sheet, Lasers in Engineering, 31 (5/6) (2015), 351-382.
20. Amit Sharma and Vinod Yadava, Simultaneous Optimization of Average Kerf Taper and Surface Roughness during Pulsed Nd-YAG Laser Cutting of Thin Al-alloy Sheet for Straight Profile, International Journal of Manufacturing Technology and Management, 27 (1-3) 2013, 112-126.
21. Amit Sharma, Vinod Yadava and K. B. Judal, Intelligent Modeling and Multi-objective Optimization of Laser Beam Cutting of Nickel Based Superalloy Sheet, International Journal of Manufacturing, Materials, and Mechanical Engineering, 3(2) (2013) 1-16.
22. Amit Sharma and Vinod Yadava, Modelling and Optimization of Cut Quality during Pulsed Nd-YAG Laser Cutting of Thin Al-alloy Sheet for Curved Profile, Optics and Lasers in Engineering, 51 (1) (2013) 77-88.
23. Amit Sharma and Vinod Yadava, Modelling and Optimization of Cut Quality during Pulsed Nd-YAG Laser Cutting of Thin Al-alloy Sheet for Straight Profile, Optics and Laser Technology, 44 (2012) 159-168.
24. Amit Sharma and Vinod Yadava, Modelling and Optimization of Pulsed Nd-YAG Laser Cutting for Average Kerf Taper and Surface Roughness during Straight Cutting of Ni-based Superalloy Thin Sheet, International Journal of Machining and Machinability of Materials, 11 (3) (2012) 223-243.
25. Amit Sharma and Vinod Yadava, Optimization of Cut Quality Characteristics during Nd-YAG Laser Straight Cutting of Ni-Based Superalloy Thin Sheet Using Grey Relational Analysis with Entropy Measurement, Materials and Manufacturing Processes, 26 (2011) 1522-1529.
26. Amit Sharma and Vinod Yadava, Optimization of Cut Qualities during Pulsed Nd-YAG Laser Cutting of SUPERNI 718 Thin Sheet for Straight Profile, International Journal of Manufacturing Technology and Management, 24 (2011) 108-123.
27. Amit Sharma, Vinod Yadava, Raghvendra Rao, Optimization of Kerf Quality Characteristics during Nd: YAG Laser Cutting of Nickel Based Superalloy Sheet for Straight and Curved Cut Profiles, Optics and Lasers in Engineering, 48 (9), 2010, 915-925.
Other Reputed Journal Publications:
1. Priyanka Joshi, Md Tasnim Arif and Amit Sharma, Response Surface Modelling of Bottom Kerf Deviation in Nd-YAG Laser Cutting of Al 6061-T6 Alloy Sheet, JUET Research Journal of Science & Technology 6 (Special Issue) 2020, 01-06.
2. Praneet Pandey, Aman Sharma and Amit Sharma, Electric Discharge Machining of Composites- A Review, ELK Asia Pacific Journal – Special Issue: Futuristic in Mechanical Engineering (FME-2019), pp. 358-365, 2019
3. Priyanka Joshi, Amit Sharma, Yashwant Kumar Modi, Modeling and Optimization of Kerf Geometry during Nd: Laser Cutting of Aluminium Alloy Sheet, ELK Asia Pacific Journals-Special Issue.: ARIMPIE-2017, pp.296-300.
4. Amit Sharma, Bhagat Singh and M. Hameedullah, Sintering Behavior of Tin-base Alloy Under Conventional and Microwave Heating, JUET Research Journal of Science and Technology, Volume 3, Issue 1, pp. 69-79, 2016.
5. Saif Ali Khan, Pranay Kumar Tiwari, Amol Shrivastava and Amit Sharma, Laser Beam Micromachining–A Review, ELK Asia Pacific Journals-Special Issue.: ARIMPIE-2016, pp. 210-215.
6. Amrit Shiwani and Amit Sharma, Optimization of Electro Discharge Machining of Superalloys and Composites: A Review, ELK Asia Pacific Journals-special issue, Vol.2, pp.331-339, 2015.
7. Achal Gupta, Aditya Agrawal and Amit Sharma, Modelling of Electro-Discharge Machining of Difficult-to-Machine Materials: An Overview, ELK Asia Pacific Journals-special issue, Vol.2, pp.429-437, 2015.
8. Bhagat Singh and Amit Sharma, Identification of cracks in beams using a new merged technique, JUET Research Journal of Science and Technology, Volume 2, Issue 1, pp. 95-107, 2015.
9. Amit Sharma and Vinod Yadava, Optimization of Kerf Quality using Robust Design of Experiments during Nd-YAG Laser Cutting of Thin Aluminium Alloy Sheet for Straight Profile, MIT International Journal of Mechanical Engineering, 1 (1) (2011) 1-8.
10. Amit Sharma and Vinod Yadava, Study on Kerf Taper and Surface Roughness in Nd-YAG Laser Beam Cutting Based on Taguchi Method, Journal of Manufacturing Engineering, 6 (2) (2011) 93-98.
International Conference
1. Amrit Shiwani, Deepesh Rai, Prakhar Singh, Abhinav Singh and Amit Sharma, Parameter optimization in electro discharge drilling of Inconel718 Superalloy Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering, December 12-14, 2019, IIT Indore, ISBN: 978-93-5391-796-8, (Paper ID: 1560094948)
2. Divya Singh and Amit Sharma, Thermal Modelling and Simulation of Laser Beam Percussion Drilling of Inconel 718, International Conference on Quality, Productivity, Reliability, Optimization & Modelling (ICQPROM), January 5-7, 2017, pp. 321-325.
3. Divyansh Medatwal and Amit Sharma, Natural fibre reinforced polymer composites: a review, In Proceedings of International Conference on Design, Materials and Manufacturing Concerns in Production of Quality Engineering Goods, HBTU Kanpur, India, pp. 191-200, March 27-29, 2017.
4. Priyanka Joshi, Amit Sharma, Vinod Yadava and Yashwant Kumar Modi, Multi-objective Optimization of Kerf Quality Characteristics during Nd-YAG Laser Cutting of Ni-based Superalloy Thin Sheet using Hybrid Approach, Proceedings of the 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016) College of Engineering, Pune, Maharashtra, India, December 16-18, 2016, pp. 454-457.
5. Amit Sharma, Divya Singh and Vinod Yadava, Optimization of Kerf geometry during profile cutting of nickel based superalloy thin sheet using Nd-YAG laser, International Conference on Application of Lasers in Manufacturing (CALM-2015), Pragati Maidan, New Delhi, India, and September 9-11, 2015.
6. Amrit Shiwani, Amit Sharma, Electro Discharge Machining of Advanced Engineering Materials: An Overview, International Conference on Newest Drift in Mechanical Engineering (ICNDME-2014), M.M. University, Mullana, Haryana, December 20-21, 2014, pp. 497-503.
7. Amit Sharma, Vinod Yadava and S.S Agarwal, Modelling of Cut Qualities during Nd-YAG Laser Cutting of Thin Aluminum Alloy Sheet Metal using Artificial Neural Network, International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-8), National Institute of Technology, Calicut, Kerala, December 13-15, 2013, pp. 789-794.
8. Smita Gupta, Vinod Yadava, Sanjay Mishra, Amit Sharma, Finite Element Analysis of Laser Beam Bending in Ultra Thin Aluminum Foil, International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-7), College of Engineering Pune, December 10-11, 2011, pp. 420-423.
9. Amit Sharma and Vinod Yadava, Optimization of Multiple Quality Characteristics during Nd-YAG Laser Cutting of SUPERNI 718 Thin Sheet, Proceedings of the 3rd International and 24th All India Manufacturing Technology, Design and Research (AIMTDR)Conference organized by Andhra University College of Engineering (A), Visakhapatnam, December 13-15, 1 (2010), 165-170.
10. Mohd. Salim, Vinod Yadava, Sanjay Mishra, Amit Sharma, 3D Transient Finite Element Analysis of Laser Percussion Drilling of Thin Sheet Metal, Proceedings of the 3rdInternational and 24th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, AUEC Visakhapatnam, December 13-15, 2010,Vol-2, pp. 879-884.
11. Amit Sharma, Vinod Yadava, Modeling and Analysis of Pulsed Nd: YAG Laser Cutting of thin Ni-based Superalloy Sheet, Proceedings of the 3rd International conference on Advances in Mechanical Engineering (ICAME-2010), SVNIT, Surat, January 4-6, 2010, pp.722-726.
National Conference
1. Abhinav Sharma, Gaurav Pushkarna, Amit Sharma, Electrical Discharge Machining of Superalloys: A Review, National Conference on Paradigms in Mechanical Engineering (PME-2014), MRIU Faridabad (Haryana), December 20, 2014, pp. 94-97.
2. Amit Sharma, Amrit Shiwani, Vinod Yadava, Optimization of Kerf Deviation during Pulsed Nd: YAG Laser Cutting of Thin Al-alloy Sheet for Curved Profile, Proc. of the National Conference on Emerging Frontiers in Mechanical Engineering, at HBTI Kanpur, Feb-2014, pp. 113-118.
3. Amit Sharma and Vinod Yadava, Optimization of Pulsed Nd-YAG Laser Cutting of Thin Ni-based Superalloy Sheet, Proceedings of the National Conference on Achieving Excellence for Industrial Competitiveness (AEIC-2013), GLAU Mathura, from 19-20 January (2013), 16-24.
4. Amit Sharma and Vinod Yadava, Study of Optimal Process Parameters during Pulsed Nd-YAG Laser Cutting of Superalloy Thin Sheet using Taguchi’s Matrix Method, Proceedings of the National Conference on Advancements & Futuristic Trends in Mechanical and Industrial Engineering (AFTMIE-2010), Bilaspur, Haryana, from 12-13 November (2010) 41-45.
5. Amit Sharma and Vinod Yadava, Application of Taguchi Method in the Optimization of Process Parameters for Kerf Taper in Laser Cutting, Proceedings of the Golden Jubilee National Conference on Recent Advances in Manufacturing (RAM), SVNIT, Surat, from 19-21 July (2010) 381-385.
6. Amit Sharma, Vinod Yadava, Raghvendra Rao, Parameter Optimization of Straight and Curved Cutting of Thin Superalloy Sheet using Nd: YAG Laser, Proceedings of National Conference on Recent Advances in Manufacturing Technology and Management(RAMTM)Jadavpur University Kolkata, 19-20 February 2010, pp. 59-64.
1. Kedari Lal Dhaker, Amit Sharma, Tasnim Arif, Gaurav Shukla, Akshat Shukla, Shwetank Avikal, Statistical Analysis and Data-Driven Modeling of Hole Circularity in EDD of Aerospace Material, Advances in Materials Engineering, Lecture Notes in Mechanical Engineering, Springer Nature Singapore, 2025.
2. Durgeshwar Pratap Singh, Shwetank Avikal, Harvindra Singh, Shivani Monga, Amit Sharma, A MCDM-Based Approach for the Selection of Industrial Robots for Arc Welding Process, Advances in Materials Engineering, Lecture Notes in Mechanical Engineering, Springer Nature Singapore, 2025.
3. Amit Sharma, Yogesh Iyer Murthy, Ashwanikant Sharma, Taguchi Analysis on Cathodically Protected Steel in Simulated Concrete Pore Solution, Exploring Emerging Trends in Civil Engineering Volume 1, Springer Nature Singapore, 2025.
4. Amit Sharma, Aman Thakur, Rakesh Kumar Phanden, Tensile Behavior of Jute-Carbon Reinforced Polymer Matrix Composite Using ABAQUS, Lecture Notes in Mechanical Engineering, 2024, pp. 721–730
5. Md Tasnim Arif, Amit Sharma, "Optimization of MRR and TWR in Electric Discharge Drilling of Ti-Alloy Using Hybrid Approach of Taguchi-Based GRA and PCA", Proceedings of FLAME 2022: Advances in Industrial and Production Engineering pp 339–349, Lecture Notes in Mechanical Engineering, July 2023.
6. Priyanka Joshi, Amit Sharma, and Vivek Singh, “Empirical Modelling of Kerf Characteristics in Laser Profile Cutting of Ni-Superalloy”, Proceedings of International Conference in Mechanical and Energy Technology, Smart Innovation, Systems and Technologies. Springer, Singapore, vol 174, pp 655-664, https://doi.org/10.1007/978-981-15-2647-3_61, June 2020.
7. Priyanka Joshi, Amit Sharma, Vinod Yadava and Yashwant Kumar Modi, “Nd: YAG Laser Cutting of Ni-Based Superalloy Thin Sheet: Experimental Modeling and Process Optimization”, in Application of Lasers in Manufacturing. Chapter 8, pp. 179-208; Springer, Singapore, June, 2019.
· Amit Sharma, Amit Kumar Srivastava, Tasnim Arif, Nitesh Pandey, “Microwave Oven”, design registered on March 02, 2026 (Design No. 454181-001).
· Nitish Pandey, Amit Sharma and Amit Kumar Srivastava, “Crop Cum Grass Cutter Robot”, design registered on October 21, 2025 (Design No. 469157-001).
· Amit Sharma et al., “IOT Based Computerized Numerical Control Fiber Laser Composite Material Cutting Machine” Design Registered on December 27, 2023. (Design No.- 396731-001).
· Amit Sharma et al., “Wire Electrical Discharge Machining Optimizer” Design Registered on December 14, 2023. (Design No.- 396563-001).
· International Association of Engineers (IAENG: Member No.-136799)
· Life Member of Indian Laser Association (ILA): LM-1140
